DIN Rail Power Supply Stock in Australia

din_rail_power_supplies_in_stock

If you are urgently looking for a DIN rail power supply, then call ADM on 1300 236 467. Or, if you prefer, please send an email via our online enquiry form:  

ADM Online Enquiry Form 

ADM holds the widest range of stock of MEAN WELL DIN rail power supplies in Australia. In this blog post we give you an overview of our range of DIN rail power supplies, we are sure that we will have a power supply that is suitable for your needs. 

DIN Rail Power Supply 12V  

One of the most common requests we receive is for a DIN rail power supply with a 12V DC output. Our range of 12V DIN rail power supplies includes models as small as 10 WATTS right through to models as large as 136 WATTS.  

The below table sets out the range of 12V DIN rail power supplies that we have on the shelf, so that you can do a quick comparison. 

ADM also stocks DIN rail power supplies with other output voltages. To browse our entire range please click on the following link: 

DIN Rail Power Supplies 

Model

Output V/A

Power

Description

MDR-10-12

12V / 0.84A

10.08W Slimline

HDR-15-12

12V / 1.25A 15W Low profile, stepped front

DR-15-12

12V / 1.25A 15W Not for new designs*

MDR-20-12

12V / 1.67A 20W Slimline

HDR-30-12

12V / 2A 24W Low profile, stepped front

DR-30-12

12V / 2A 24W Not for new designs*

MDR-40-12

12V / 3.33A 40W Slimline

DR-4512

12V / 3.5A 42W Not for new designs*

HDR-60-12

12V / 4.5A 54W Low profile, stepped front

DR-60-12

12V / 4.5A 54W Not for new designs*

MDR-60-12

12V / 5A 60W Slimline

EDR-75-12

12V / 6.3A 75.6W Economical model 

NDR-75-12

12V / 6.3A 75.6W Standard model 

SDR-75-12

12V / 6.3A 75.6W High spec model 

DR-75-12

12V / 6.3A 75.6W Not for new designs*

HDR-100-12

12V / 7.5A 85.2W Low profile, stepped front

MDR-100-12

12V / 7.5A 85.2W Slimline

DR-100-12

12V / 7.5A 85.2W Not for new designs*

EDR-120-12

12V / 10A 120W Economical model 

NDR-120-12

12V / 10A 120W Standard model 

SDR-120-12

12V / 10A 120W High spec model 

WDR-120-12

12V / 10A 120W Wide input range 

DR-120-12

12V / 10A 120W Not for new designs*

HDR-150-12

12V / 11.3A 136.6W Low profile, stepped front
*ADM holds stock for customers needing replacements. 

Don’t worry If the current brand of 12V DIN rail power supply you have is not MEAN WELL, we are happy to suggest an equivalent MEAN WELL model that you can use as an alternative. Just call 1300 236 467 and a member of our expert team will gladly help you.  

Low profile, stepped front
Low profile, stepped front DIN rail power supply
Slimline
Slimline DIN rail power supply

 

Economical
Economical DIN rail power supplies
Standard
Standard DIN rail power supply

 

High specification
 High specification DIN rail power supply
Wide input
DIN rail power supply with wide input range

 

DIN Rail Power Supply 24V 

Of course, we also stock a wide range of DIN rail power supplies with a 24V output. In fact, our range of 24V DIN rail power supplies is much wider than our 12V range. Models start as small as 10 WATTS and go right up to 960 WATTS.  

See the following table, which will help you compare the models we have. These are all single-phase models. For two and three phase DIN rail power supplies please see the relevant section later in this blog post.  

Model

Output V/A

Power

Description

MDR-10-24

24V / 0.42A

10W Slimline 

HDR-15-24

24V / 0.63A 15.12W Low profile – stepped front

DR-15-24

24V / 0.63A 15.12W Not for new designs*  

MDR-20-24

24V / 1A 24W Slimline 

HDR-30-24

24V / 1.5A 36W Low profile – stepped front

DR-30-24

24V / 1.5A 36W Not for new designs* 

MDR-40-24

24V / 1.7A 40.8W Slimline 

DR-4524

24V / 2A 48W Not for new designs* 

HDR-60-24

24V / 2.5A 60W Low profile – stepped front

MDR-60-24

24V / 2.5A 60W Slimline 

DR-60-24

24V / 2.5A 60W Not for new designs* 

EDR-75-24

24V / 3.2A 76.8W Economical model

NDR-75-24

24V / 3.2A 76.8W Standard model

SDR-75-24

24V / 3.2A 76.8W High spec model 

DR-75-24

24V / 3.2A 76.8W Not for new designs* 

HDR-100-24

24V / 3.83A 92W Low profile – stepped front

MDR-100-24

24V / 4A 96W Slimline

DR-100-24

24V / 4.2A 100.8W Not for new designs* 

EDR-120-24

24V / 5A 120W Economical model

NDR-120-24

24V / 5A 120W Standard model

SDR-120-24

24V / 5A 120W High spec model 

WDR-120-24

24V / 5A 120W Wide input range 

DR-120-24

24V / 5A 120W Not for new designs* 

EDR-150-24

24V / 6.5A 156W Economical model

HDR-150-24

24V / 6.25A 150W Low profile – stepped front

DRP-240-24

24V / 10A 240W Not for new designs* 

NDR-240-24

24V / 10A 240W Standard model

SDR-240-24

24V / 10A 240W High spec model 

WDR-240-24

24V / 10A 240W Wide input range 

DRP-480-24

24V / 20A 480W Not for new designs* 

DRP-480S-24

24V / 20A 480W Not for new designs* 

NDR-480-24

24V / 20A 480W Standard model

SDR-480-24

24V / 20A 480W High spec model 

WDR-480-24

24V / 20A 480W Wide input range 

SDR-960-24

24V / 40A 960W High spec model 
*ADM holds stock for customers needing replacements. 

2 Phase DIN Rail Power Supplies & 3 Phase DIN Rail Power Supplies 

ADM also stocks a considered range of DIN rail power supplies with 2 phase or 3 phase inputs. These are available in power outputs ranging from 120 WATTS up to 960 WATTS: 

Model

Output V/A

Power

Description

DRH-120-24

24V / 5A

120W Two-phase 

DRH-120-48

48V / 2.5A 120W Two-phase 

DRT-240-24

24V / 10A 240W Three-phase

DRT-240-48

48V / 5A 240W Three-phase

TDR-240-24

24 / 10A 240W Slimline. Three-phase

TDR-240-48

48V / 5A 240W Slimline. Three-phase

DRT-480-24

24V / 20A 480W Three-phase

DRT-480-48

48V / 10A 480W Three-phase

TDR-480-24

24V / 20A 480W Slimline. Three-phase

TDR-480-48

48V / 10A 480W Slimline. Three-phase

DRT-960-24

24V / 40A 960W Three-phase

DRT-960-48

48V / 20A 960W Three-phase

TDR-960-24

24V / 40A 960W Slimline. Three-phase

TDR-960-48

48V / 20A 960W Slimline. Three-phase
2 phase
2 phase DIN rail power supply
3 phase
3 phase DIN rail power suply
3 phase, slimline
slimline 3 phase DIN rail power supply

Connecting DIN Rail Power Supplies in Parallel 

DIN rail power supplies can be connected in parallel, so long as the power supplies in question have a ‘current sharing’ function. 

In fact, depending on the actual power supply in question, you may be able to connect more than two in parallel. 

Many people believe that you can use any two power supplies in parallel, so long as you use two diodes to isolate the power supplies. 

This is not correct. This will only give you redundancy. In other words, if one power supply fails then the other will take over the load. But it will not allow the power supplies to share the load. 

Connecting DIN Rail Power Supplies in Series 

Any Mean Well power supply can be connected in series. They have isolated outputs, so that they can be connected in series to give you a higher voltage. 

This is particularly useful if you have an unusual voltage that you need. Different power supplies with different voltages can be connected in series to give you the final voltage that you need. 

However, you must ensure that the power supplies you are connecting in series all have a very similar current rating.          

For example, if you want 60V at 5A, you can put a MEAN WELL NDR-240-48 and a MEAN WELL NDR-120-24 in series and adjust the voltage to give you the 60V. 

Both power supplies are rated at 5A so they will run without one overpowering the other. 

In general practice it is recommended that you put a diode across the output of each power supply. 

This is to prevent reverse voltage across the power supplies, should one start before the other. 

Further information on DIN Rail Power Supplies 

If you would like any further information on DIN rail power supplies, then please do not hesitate to contact ADM on 1300 236 467. A member of our expert team will gladly answer any questions you have and will assist you in selecting the DIN rail power supply that is best suited to your application.